Airframe Bulk Plates
"Bulkhead Plates" (or bulkheads) fit inside airframe tubing.
1.1" (29mm) Bulk plate
This bulkplate fits inside 1.1" (29mm) airframe/motor tube. 1/4" plywood. Fits our 1.1" (29mm) tubes as well as Madcow and LOC paper and phenolic...
1.6" (38mm) Bulk plate
This bulkplate fits inside 1.6" (38mm) airframe/motor tube. 1/4" plywood. Fits our 1.6" (38mm) tubes as well as Madcow and LOC paper and phenolic...
1.9" Bulk plate
This bulkplate fits inside 1.9" Aerotech airframe. 1/4" plywood. Note: The size specified is the size of the tube this bulkhead fits and is not an...
54mm Motor Tube Bulk plate
This bulkplate fits inside 54 mm motor tube . 1/4" plywood. See the next listing for the bulkhead fitting 2.2" airframe Note: The size specified is...
2.2" Airframe Bulk plate
This bulkplate fits inside 2.2" airframe. 1/4" plywood. See the previous listing for the bulkhead fitting 54mm Motor Tube Note: The size specified is...
2.6" Bulk plate
This bulkplate fits inside 2.6" airframe. 1/4" plywood. This bulk plate also perfectly fits inside BT-80 tube Note: The size specified is the size of...
3" Bulk plate
This bulkplate fits inside 3" tubes (Rocketarium, LOC, Phenolic, Blue Tube). 1/4" plywood. Dimensions: - 2.99", 1/4", 17.3g
4" Bulk plate
This bulkplate fits inside 4" cardboard tube. 1/4" plywood. Not for Phenolic Tubes (see next) Note: The size specified is the size of the tube this...
4" Bulk plate (P)
This bulkplate fits inside 4" Phenolic Tube. 1/4" plywood. Not for cardboard tubes (see previous) Note: The size specified is the size of the tube...