Bulkheads
"Bulkhead Plates" (or bulkheads) fit inside airframe tubing while "Coupler Bulkhead Plates" fit inside couplers.
You can browse this entire category, or limit your selection to bulkheads or coupler bulkheads.
BT-50 Coupler Bulk plate with Screw Eye
BT-50 Coupler bulkplate fits inside our BT-50 Coupler. 1/8" plywood. Comes with hole in the center for the Scre Eye. Screw Eye is included.
BT-55 Coupler Bulk plate with Coupler and Screw Eye
BT-55 Coupler bulkplate fits inside our BT-55 Coupler. 1/8" plywood. Comes with hole in the center for the Scre Eye. Screw Eye and matching coupler...
BT-60 Coupler Bulk plate with Screw Eye
BT-60 Coupler bulkplate fits inside our BT-60 Coupler. 1/8" plywood. Comes with hole in the center for the Scre Eye. Screw Eye is included.
BT-70 Coupler Bulk plate with Screw Eye
BT-70 Coupler bulkplate fits inside our BT-70 Coupler. 1/8" plywood. (bulkhead OD 52.6mm) Comes with hole in the center for the Scre Eye. Screw Eye...
BT-80 Coupler Bulk plate with Screw Eye
BT-80 Coupler bulkplate fits inside our BT-80 Coupler. 1/8" plywood. (bulkhead OD 2.47") Comes with hole in the center for the Scre Eye. Screw Eye is...
1.1" (29mm) Bulk plate
This bulkplate fits inside 1.1" (29mm) airframe/motor tube. 1/4" plywood. Fits our 1.1" (29mm) tubes as well as Madcow and LOC paper and phenolic...
1.6" (38mm) Bulk plate
This bulkplate fits inside 1.6" (38mm) airframe/motor tube. 1/4" plywood. Fits our 1.6" (38mm) tubes as well as Madcow and LOC paper and phenolic...
1.9" Bulk plate
This bulkplate fits inside 1.9" Aerotech airframe. 1/4" plywood. Note: The size specified is the size of the tube this bulkhead fits and is not an...
54mm Motor Tube Bulk plate
This bulkplate fits inside 54 mm motor tube . 1/4" plywood. See the next listing for the bulkhead fitting 2.2" airframe Note: The size specified is...
2.2" Airframe Bulk plate
This bulkplate fits inside 2.2" airframe. 1/4" plywood. See the previous listing for the bulkhead fitting 54mm Motor Tube Note: The size specified is...