Make Your Own Decals!

This is water-slide decal paper, which you can use to print your decals on an inkjet printer. 5 Sheets in the pack. "Letter" size.

Instructions for Use:

• Print your design on the decal paper using your inkjet printer. Make sure to allow the ink to dry completely (we recommend waiting at least 24 hours).
• Once dry, apply a clear spray varnish to seal the ink. Use light coats of the varnish, spraying from about 10-12 inches away. Allow the varnish to dry between coats.
• Recommended varnishes include Krylon Crystal Clear spray, Testors Glosscoat, or Rust-Oleum Matte Finish "Clear Protective Finish" spray.
• Let the sealed decals dry for 1-2 days before using them.
• Avoid water-based sealants, as inkjet inks are typically water-soluble.

Important Notes:

• Always test your chosen varnish on a small sample decal first to ensure compatibility with your specific ink and printer combination.
• Brushing on varnish is not recommended, as it may smear the ink. Stick to spray varnishes for best results.
• Once sealed and dried, the decals are ready to be applied to your project. Simply soak the decal in water and slide it onto your surface.