Make your own Decals !

This is water-slide decal paper, which you can use to print your decals on the laser printer. 5 Sheets in the pack. "Letter" size.

From the Canadian Rocket Store: We have tested this paper and found that it works very well on our Brother Laser Printer. We used it successfully with "Thick" paper mode. Our printer fuser unit has a mechanical switch for the envelopes. If your printer has this switch - engage it before printing on the decal paper.

• Find the table with the fuser temperatures for your printer on the internet. Select the setting with the lower temperature first (~ 185C)
• Do not use if your fuser temperature is over 205C.
• Engage the "Envelope" Mechanical Switch within fuser unit.

NOTE: Some older laser printers may print at much higher temperatures (> 400C) and melt the plastic. Please read the disclaimer below:

Disclaimer: Printing on any media not recommended or approved by your printer's manufacturer may void your manufacturer's warranty. We have made extensive tests to determine that this media is safe for use in most newer desktop color laser printers. However any media can and may cause a paper jam in some printers that may require a service call or the purchase of a new fuser unit.

The user of this paper/film must determine the suitability of this product before beginning production by testing first on user's equipment and testing the method of application. The Sellers and Manufactures maximum obligation shall be to replace paper/film that has been found to be defective. Neither the manufacturer nor the seller shall be held liable for any loss of materials or equipment, injury, direct or consequential, arising out of the use of, or inability to use this paper/film.