• Uses A, B, C Estes Motors
• Consists of seven pre-cut plywood pieces, motor tube, and launch lug.
• The clearly illustrated instructions make the Vortico rocket easy to assemble.
• The plywood pieces have tabs to which fit together to make building the rocket even easier.
• Basic Assembly Skills Required

This rocket should not be flown on windy days. Use a short (1 foot) launch rod.

Recommended Engines:

A8-0 , B6-0 , C6-0 , C6-3

Specifications

• Diameter: 6" (15 cm)
• Estimated Weight: 3.1 oz. (15 g)

Description

Looking for something different? Give this oddroc a whirl! The Vortico shoots straight up into the sky and starts spinning. That motion results in helicoptering on the way down for a smooth landing.
The Vortico doesn't land far from where it took off. This is a great rocket for launch sites with small recovery area.

Clearly, the Vortico is different from most rockets. It is built with seven plywood pieces. The plywood pieces have tabs to which fit together to make building the rocket even easier. The clearly illustrated instructions make the Vortico rocket easy to assemble.

Requires

• Assembly 
• Motor, Igniter 
• Launch System 
• Carpenter's glue
• Fine Sand Paper
• Utility or Hobby Knife