C-POXY 30 is a general purpose structural-unfilled-fast setting epoxy adhesive. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass, and many plastics such as polyester, ABS and rigid PVC (not suitable for PTFE-PP-PE and rubbers) Works better than other epoxies for bonding brass, bronze, and glass. Perfect for countertop repairs, musical instrument manufacturing and repairs.
Procedure to Make Strong Bond:
Part A and B need to be mixed thoroughly in the correct volume ratio of 1:1 for 1 minute before use. The gel time of the mixed product is 20-40 minutes at room temperature. Parts requiring bonding should be assembled and kept close without any stress. Assembling is continued until full curing takes place. Excess of the product can be cleaned with Acetone or any solvent-based cleaner compatible with the substrates to bond. For best results, it is recommended to scratch (if possible) the surface, then gently degrease, and clean the excess material off the area. All-purpose epoxy for Bonding Metals, Ceramics, Stone, Glass, Concrete, Wood, and Fiberglass etc. Do not mix a large batch. Mixing a large batch can create heat (exothermic reaction) and reduce cure time.
Technical Data Sheet
C-POXY 30 is a general purpose structural-unfilled-fast setting epoxy adhesive. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass, and many plastics such as polyester, ABS and rigid PVC (not suitable for PTFE-PP-PE and rubbers) Works better than other epoxies for bonding brass, bronze, and glass. Perfect for countertop repairs, musical instrument manufacturing and repairs.
Procedure to Make Strong Bond:
Part A and B need to be mixed thoroughly in the correct volume ratio of 1:1 for 1 minute before use. The gel time of the mixed product is 20-40 minutes at room temperature. Parts requiring bonding should be assembled and kept close without any stress. Assembling is continued until full curing takes place. Excess of the product can be cleaned with Acetone or any solvent-based cleaner compatible with the substrates to bond. For best results, it is recommended to scratch (if possible) the surface, then gently degrease, and clean the excess material off the area. All-purpose epoxy for Bonding Metals, Ceramics, Stone, Glass, Concrete, Wood, and Fiberglass etc. Do not mix a large batch. Mixing a large batch can create heat (exothermic reaction) and reduce cure time.
★ Modeling, Hobbies, Wood Working, Toy Repairs, Car Part Repairs, 3D Printing, Bonding, Framing Repairs, Glass Repairs, Furniture Repair/Manufacturing, Ceramic Repairs, Jewelry Application.
★ The product must be kept in a cool and dry room from 10°C to 25°C.
★ Our line of Epoxies has a consistent thickness, cures quickly, water and impact resistant.
★ Open the seal of each bottle (linear under the cap) and cut the tip of the bottle to allow each part to flow freely.
Common Applications:
Crystal/Glass Repairs
Antique Repairs
Furniture Repair/Manufacturing
Stone Repair/Manufacturing
Jewelry Repair/Manufacturing
Wood Working
Etc
Arrow Tips Bonding
Musical Instrument Repairs
Bronze Statue Repairs
Brass Object Repairs
Pen Manufacturing
Countertop Repairs
