Skill Level: Advanced

One of the LOC Custom SERIES of kits. Designed for the most advanced builders which include factory pre-slotted airframe and through-the-wall fin construction, the 1/3rd scale Phoenix is one of our favorite scale production kits! It uses a central 75mm motor mount tube and fins that attach to the motor mount directly for maximum power flights. This kit is intended for advanced Level 2 flyers as it requires the addition of nose weight and makes a huge addition to your fleet . You can fly it on an I-200 with a motor mount adapter, K-1050 with optional MMA-5 adapter or go for the 75mm motors. The included removable nose weight system and electronics bay allow for a variety of motors to be flown at the field of your choice!

The RNWS nose weight system is a LOC/Precision designed modular system for adding and removing nose weight. Using a bulk head and tube system, you can create the perfect amount of balance for your preferred motor. It can then be removed and replaced with a different weight for your second favorite motor!!!

5.5" Phoenix pictured with custom graphics. Decals not included*
Features

• Payload Section
• 1/4" Plywood Fins
• 1/4" Centering Rings
• 75mm Motor Mount
• 18" Drogue 60" Main Parachutes
• Tubular Nylon / Quick Links
• 1500 Series Rail Buttons
• Removable Nose Weight System Instructions
• Electronics Bay Instructions
• Dual Deployment
• Instructions: No--LOC custom series

This is a high-power kit.
Phoenix is a big and heavy rocket, therefore you need to pay close attention to the CG. You also need to pick the parachute and retainer. Epoxy can cause an allergic reaction in some people. Adult supervision and wearing rubber gloves is recommended when working with epoxy.

This kit does not include an engine retention system. It is up to the builder to provide for motor retention